Mini L298N DC Motor Drive Controller Module

Mini L298N DC Motor Drive Controller Module

Description

Feature:

• 1. Dual H-Bridge Motor Driver: This module can drive 2-Way DC motors or one 4-wire, 2-phase stepper motor simultaneously with its dual H-bridge design.

• 2. Wide Voltage Range: This driver can operate in a voltage range of 2V to 10V, making it perfect for use in smart cars, toy cars, robots, and other battery-powered devices.

• 3. Flexible Input Signal Voltage: The signal input voltage range is from 1.8V to 7V, which can be easily controlled by microcontrollers or other control systems.

• 4. High Current Handling Capability: The module can handle a continuous current of up to 1.5A per channel, with peak currents up to 2.5A, and has a low standby current of less than 0.1uA.

• 5. Built-in Protection Circuits: This module includes an anti-common mode interference circuit to prevent false triggering when input pins are floating, as well as a thermal shutdown protection circuit (TSD) that has a hysteresis effect to prevent motor damage due to overheating.

Specification:

Installation hole diameter: 2mm/0.07in

Product size: 25 * 21 * 5mm/0.98 * 0.83 * 0.20in

Net weight: 5g

Attention:

• 1. Reverse connection between the positive and negative poles of the power supply will definitely cause circuit damage.

• 2. In the case of short circuit to ground or output terminal, as well as motor lockup, the chip will be thermally protected, but it can also cause chip burnout when the voltage is close to or exceeds 10V and the peak current greatly exceeds 2.5A.